Question No : 1
An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

• A.Add the PowerEdge R420 PSU modules to the PowerEdge R440
• B.Order a new PSU specific to the existing PowerEdge R440
• C.Add the PowerEdge R430 PSU modules to the PowerEdge R440
• D.Configure the PowerEdge R440 PSU with 1+1 configuration

Show Answers

Answer:

Question No : 2
What is required to use the iSM Automatic System Recovery feature?

• A.Server Administrator installed
• B.OS watchdog timer disabled
• C.Server Administrator not installed
• D.OS watchdog timer enabled

Show Answers

Answer:

Question No : 3
CORRECT TEXT
For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.

Show Answers

Answer:Send us your suggestion for this simulation task.

Question No : 4
What happened on April 30, 2019?






Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A.Option A
• B.Option B
• C.Option C
• D.Option D

Show Answers

Answer:

Question No : 5
What is a key distinction between 1DRAC8 and 1DRAC9?

• A.iDRAC9 offers HTML5 based GUI
• B.iDRAC9 default credentials are root/calvin orderable only
• C.iDRAC8 offers HTML5 based GUI
• D.iDRAC8 default credentials are customer orderable

Show Answers

Answer:

Question No : 6
Where is the data stored to allow Easy Restore to successfully complete a system board replacement?

• A.NAND Flash module on the disk drive mid plane
• B.IDSDM SD card
• C.vFlash SD card
• D.Serial Flash storage in the server's front panel

Show Answers

Answer:

Question No : 7
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server.
Which BIOS settings need to be used for installing the Windows server?
A)



B)



C)



D)

• A.Option A
• B.Option B
• C.Option C
• D.Option D

Show Answers

Answer:

Question No : 8
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment.
The inventory consists of:



The server power configuration will be set for gnd redundancy. The management switch is 1000 Base-T and the top of rack switches 10Gb
What additional component(s) is needed for this configuration?

• A.Hot-plug power supply, 750 W - qty 1
• B.Hot-plug power supply, 1100W - qty 1
• C.Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
• D.C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2

Show Answers

Answer:

Question No : 9
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

• A.Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
• B.Dispatches technical support from Dell for all Dell servers, storage, and networking devices
• C.Proactive, predictive, and automated support technology to enable faster resolution and reporting
• D.Includes onsite monitoring and automated collection of system state information

Show Answers

Answer:

Question No : 10
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system .
What Is the cause of this Issue?






Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A.The Virtual Console is disabled
• B.Operating system not installed on remote server
• C.The server has been powered down
• D.There are more than the maximum number of active sessions

Show Answers

Answer: