Question No : 1
What is the main key for a network design to ensure users have a good experience running their applications'?

• A.Provision adequate bandwidth.
• B.Provide appropriate AP density.
• C.Determine the number of users per location.
• D.Implement appropriate security controls

Show Answers

Answer:

Question No : 2
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.

• A.Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
• B.A standalone 7008 controller per floor
• C.Two 7205 mobility controllers in a cluster
• D.Two 7030 mobility controllers in a cluster

Show Answers

Answer:

Question No : 3
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.
What type of survey should the network architect perform?

• A.Active
• B.Virtual
• C.Passive
• D.Spectrum clearing

Show Answers

Answer:

Question No : 4
1.When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?

• A.type of users
• B.number of users per location
• C.mobility requirements and usage
• D.density of users

Show Answers

Answer:

Question No : 5
A network architect has developed a design for a new Aruba Wi-Fi network that will include a virtual Mobility Master (MM) running the ArubaOS 8.4 operating system that will manage:
• Two clustered 7210 controllers with 600 campus APs
• Two clustered VMC-50 controllers with 75 remote APs
• Wireless IPS
The architect plans on creating user roles and firewall policies on the controllers as well as implementing AirMatch.
What would meet the license requirements for this scenario?

• A.LIC-MM-VA-1000 (X1). LIC-MC-VA-50 (X1), LIC-AP (x675). PEF (X675), RFP (X675)
• B.LIC-MM-VA-50 (X1), LIC-MC-VA-50 (x2). LIC-AP (X675), PEF (x675), RFP (X675)
• C.LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x2), LIC-AP (X675). PEF (X675). RFP <x675)
• D.LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x1), LIC-AP (x600). PEF (X600), RFP (x600)

Show Answers

Answer:

Question No : 6
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm).
How many rack units should a customer plan for this switch?

• A.5
• B.4
• C.6
• D.3

Show Answers

Answer:

Question No : 7
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP.
What is the maximum speed that the customer can expect from the connected AP?

• A.2.5 Gbps
• B.1 Gbps
• C.5 Gbps
• D.10 Gbps

Show Answers

Answer:

Question No : 8
A network architect has created two sites in IRIS and defined network devices for each site.
From which window would a network architect connect the two sites together?

• A.Topology
• B.Site-1
• C.Catalog
• D.Start Page

Show Answers

Answer:

Question No : 9
Which must you perform in IRIS to assign a device to a Design Group?

• A.Right-click the device and select Set Layer Membership
• B.Right-click the device and select Set Design Group
• C.Drag and drop the device into the Site
• D.Drag and drop the device into the Design Group

Show Answers

Answer:

Question No : 10
Which feature does the Aruba AP 387 support?

• A.802.11 ax
• B.Indoor usage
• C.included external directional antennas
• D.60GHZRF

Show Answers

Answer: