Why Choose PassQuestion Network Appliance NS0-506 Exam Questions
Passquestion team uses professional knowledge and experience to provide Network Appliance NCIE-SAN NS0-506 Questions and Answers for people ready to participate in NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP exam. The accuracy rate of NS0-506 exam questions provided by Passquestion are very high and they can 100% guarantee you pass the Network Appliance NS0-506 exam successfully in the first attempt. Everyone can get NS0-506 pdf with free test engine to study. PassQuestion can promise you always have the latest version for your Network Appliance NS0-506 test preparation and get your Network Appliance NCIE-SAN certification easily.
NS0-506 Frequently Asked Questions
Q1: Can I use NS0-506 exam Q&As in my phone?
Yes, PassQuestion provides Network Appliance NCIE-SAN NS0-506 pdf Q&As which you can download to study on your computer or mobile device, we also provide NS0-506 pdf free demo which from the full version to check its quality before purchasing.
Q2: What are the formats of your Network Appliance NS0-506 exam questions?
PassQuestion provides Network Appliance NS0-506 exam questions with pdf format and software format, pdf version can be downloaded directly from your member center.Software will be sent to your email.
Q3: How can I download my NS0-506 practice test questions after purchasing?
You can download the NS0-506 pdf directly from your member center, our colleague will send the software to your email in attachment or a download link.You need to download the link in a week, it will be automatically invalid after a week.
Q4: How long can I get my Network Appliance NCIE-SAN NS0-506 questions and answers after purchasing?
You can download the NS0-506 pdf directly after your purchase and we will send the software to your email in 10 minutes in our working time and no less than 12 hours in our off time.
GMT+8: Monday- Saturday 8:00 AM-18:00 PM
GMT: Monday- Saturday 0:00 AM-10:00 AM
Q5: Can I pass my test with your Network Appliance NCIE-SAN NS0-506 practice questions only?
Sure! All of PassQuestion Network Appliance NCIE-SAN NS0-506 practice questions come from real test. If you can practice well and get a good score in our practice Q&As, we ensure you can pass your NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP exam easily.
Q6: How can I know my NS0-506 updated?
You can check the number of questions, if it is changed,that means we have updated this exam ,you can contact us anytime to ask for an free update. our sales email : [email protected]
Q7: What is your refund process if I fail Network Appliance NS0-506 test?
If you fail your NS0-506 test in 60 days by studying our study material, just scan your score report and send to us in attchment,when we check, we will give you full refund.
Q8. What other payment menthod can I use except Paypal?
If your country don't support Paypal, we offer another Payment method Western Union,it is also safe and fast. Pls contact us for the details, we will send it to your email.
Question No : 1
Before the LUN can be seen, what must be configured on the host?
A. the LUN partitioning
B. the Host Utilities Kit
C. the iSCSI software initiator
D. the HBA queue depth
Question No : 2
What is causing the problem?
A. Windows 2012 does not support jumbo frames with the iSCSI protocol.
B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol.
C. They have jumbo frames enabled on the host and storage, but not the Ethernet switches.
D. Clustered Data ONTAP 8.3 does not support jumbo frames with the iSCSI protocol.
Question No : 3
C. LUN masking
D. logical domains
Question No : 4
An administrator is attempting to map an iSCSI LUN to a Windows 2012 host, but the windows host fails to discover the iSCSI targets.
Referring to the exhibit, what is the connectivity problem?
A. The iSCSI service is running on svm1, but iSCSI is not licensed on the nodes.
B. The iSCSI LIFs are not currently on their home port.
C. The iSCSI LIFs are currently disabled.
D. The LIFs do not have a failover group defined.
Question No : 5
You need to show connectivity between which three sets of components? (Choose three.)
A. management port and ACP cabling
B. inter-cluster network ports and hosts
C. hosts and FCP switches
D. hosts and FCoE switches
E. FCP switches and storage controller
Question No : 6
A. rack space
C. clustered Data ONTAP version
Question No : 7
network interface modify ¨Cvserver svm1 ¨Clif lif1 ¨Chome ¨Cnode cl01-04 ¨Chomeport 6a
Which step is missing?
A. All hosts connecting to the controller through lif1 must be shut down.
B. The LIF must first be added to a portset.
C. Your zoning must be updated on the upstream switch.
D. The LIF must be put in a status-admin down state.
Question No : 8
Which two NetApp tools allow you to perform this task? (Choose two.)
A. OnCommand Insight
B. OnCommand Report
C. OnCommand Unified Manager
Question No : 9
1. Verify IMT supported configuration.
2. Install VSC for VMware vSphere on a Windows Server.
3. Add the storage cluster to VSC and set recommended values.
4. Update host HBA firmware and BIOS.
5. Provision the LUN.
6. Manually create an igroup and add the host WWPNs into it.
7. Map the LUN to the igroup.
Create datastore and its
containing LUNS and volumes.
In step 8, you are not able to see the LUNs you provisioned on your storage controller. When you run igroup show you see the ESX host¡¯s initiators; however, they are listed ¡°not logged in¡±.
What is the problem?
A. You need to configure ALUA.
B. The LUN was not put online.
C. The LUN type is not set to type VMware.
D. You need to configure zoning.
Question No : 10
cl01::>igroup show ¨Cvserver
VserverIgroup Protocol OS
--------- ------------- ------
-- --------- -----------------
svm1 esx_cluster mixed vmware
A customer is provisioning storage for two ESXi hosts using FCoE with CNA adapters. The customer mapped the LUN to the igroup shown in the exhibit. After scanning for new devices, the LUN is only seen by one of the ESXi hosts.
What caused the problem?
A. One of the hosts is added in the igroip via iSCSI IQN.
B. The igroup protocol needs to be configured as FCP.
C. The switch zoning configuration does not include the correct initiators.
D. The LIFs are not on their home ports.
Question No : 11
cl01-01::>vol show ¨Cvserver
svm1 ¨Cvolume v_iscsi_exch01
Vserver Name: svm1
Volume Name: v_iscsi_exch01
Aggregate Name: a1_cl01_sas
Volume Size: 5 GB
Volume State: online
Volume Type: RW
Volume Style: flex
Available Size: 4.75GB
Filesystem Size: 5GB
Total User-Visible Size:
Used Size: 144 KB
Used Percentage: 5%
Volume Nearly Full Treshold
Volume Full Treshold
Maximum Autosize (for
flexvolvs only): 6GB
Increment (for flexvolvs
Minimum Autosize: 5GB
Autosize Grow Threshold
Autosize Shrink Threshold
Autosize Mode: off
Autosize Enabled (for
flexvolvs only): false
Space Guarantee Style: volume
Space Guarantee in Effect:
Snapshot Directory Access
Space Reserved for Snapshot
Snapshot Reserve Used: 0%
Snapshot Policy: none
Node name: cl01-01
Reserved Space for
Fractional Reserve: 100%
Primary Space Management
Total Physical Used Size:
Physical Used Percentage: 0%
A customer has a volume with the configuration shown in the exhibit.
What will happen if the volume vs_iscsi_exch01 reaches 85% used?
A. The volume will delete snapshots until 20% is free in the volume.
B. The volume will automatically grow up to 6 GB.
C. The volume will no longer be accessible from the host.
D. The volume will continue working as expected.
Question No : 12
Referring to the diagram shown in the exhibit, what will happen if PDU-B fails?
A. Both Node A and Node B will remain online and all disk shelves will remain online.
B. Both Node A and Node B will remain online, but all disk shelves will immediately lose power and become inaccessible.
C. Both Node A and Node B will immediately lose power and become inaccessible.
D. Node A will immediately lose power and become inaccessible. Node B will remain online.
Question No : 13
Based on the exhibit, you are configuring a 4-node cluster with an iSCSI LIF ob each node. You connect using the first LIF from a Windows Server 2012 host.
How would you add the other three LIFs?
A. Use the MCS button.
B. Use the Devices button.
C. Use the Add session button.
D. Wait and then press the Refresh button until the other sessions appear.
Question No : 14
Question No : 15
What needs to be examined?
A. FAS8040 ALUA configuration
B. host multipath settings
C. xhost iSCSI timeout values
D. switch NPIV settings